<xmp id="44kio"><tt id="44kio"></tt>
  • <menu id="44kio"><menu id="44kio"></menu></menu>
    <nav id="44kio"><code id="44kio"></code></nav>
    <dd id="44kio"></dd>
    <menu id="44kio"><menu id="44kio"></menu></menu>

    Products

    产品中心

    专用阀系列 / Special valve

    ZSQF物料阀
    发布时间:2018-12-29 浏览次数:
     

    ZSQF物料阀

    ZSQF Discharge Valve

    ZSQF 物料阀是一种特殊型式的专用控制阀,阀体Y、L或Z形,阀体流路简单,流通能力大,压降损失小,自净能力强。广泛应用于高粘度液体,含纤维质流体,易结晶流体,易沉积流体及含颗料流体的两位式开关或调节,特别适用于储罐,反应釜等的底部放料使用。


    ZSQF Discharge valve is a special type of exclusive-use control valves,and the body is Y、L、Z-shaped.the flow path is simple,flow capacity is large,the loss of pressure drop is little,and self-purification capacity is strong.It is widely used in liquid of high-viscosity,fluid containing fiber,fluid easy to crystallize,fluid easy to precipitate,and two-digit switches containing granule fluid,especially in discharge at the bottom of the tank,reactor and so on.

    标准规格(Standard specifications)

    形式Type

    物料阀 Discharge Valve

    公称通径Body Size

    DN25-DN200(1~8)

    公称压力Body Ratings

    PN16,25,40,64,100; ANSI Class 150,300,600                     

    阀体及阀盖材质

    Body&Bonnet Material

    WCB,CF8,CF8M,CF3,CF3M,WC1,WC6,WC9,LCB,LCC,LC3,哈氏C

    填料Packing

    V型聚四氟乙稀 V-PTEE/柔性石墨 Flexible   graphite

    垫圈Gasket

    GRAP+304,GRAP+316,PTEE

    连接方式Connections

    法兰型(RF、MFMFlange type(RF,MFM)/焊接型(SW、BWWelding type(SW,BW)

    涂层Painting Color

    棕色漆Brown painting/不锈钢阀体可不涂漆No painting on stainless steel   valve body

    注:以上只是标准组合,根据工况条件,本表以外的规格也是可能的。

    Note:the above is just a standard combination,according to the working conditions,other specifications are also possible.


     
     
     上一篇:ZXSD低温角阀

     下一篇:
    彩神八官网(中国)股份有限公司